Descripción
PERFORMANCE AND FEATURES:
1. System type can be configured as: Mains (1 #) and Generator (2 #), Generator (1 #) and Mains (2 #), Mains (1 #) and Mains (2 #), Generator (1 #) and Generator (2 #).
2. 132×64 LCD with backlight, optional Chinese and English display, push button operation.
3. Measure and display bidirectional three-phase voltage and frequency:
4. Over/under voltage, phase loss, reverse phase sequence, over/under frequency protection.
5. Auto/manual mode. In manual mode, you can force the switch closed or open;
6. All parameters can be configured on site. With two different passwords that guarantee the operation of authorized personnel only.
7. During commissioning, the genset can be set to either on-load or off-load mode.
8. The ATS controller has an automatic reclosing function.
9. The closing output signal can be configured as an interval or continuous output.
10. Applicable for ATS of one neutral position, two neutral positions and no position.
11. Applicable for 2 isolated neutral lines.
12. Real Time Clock (RTC).
13. The event log can record 50 items in a circular fashion.
14. Scheduled start and stop generator (can be configured as a start genset once a day / week / month, whether under load or not).
15. It can control two generators to run in one cycle, even the running time of the genset and the idle time of the crankshaft can be set.
16. AC system or optional DC system.
17. With standard LINK communication interface. With «remote control, remote measurement, remote communication» function via ModBus communication protocol. Can remotely start/stop the genset and remotely control the ATS to close or open.
18. Can check the current status of the controller (digital input port, digital output port, over voltage, under voltage, over frequency, under frequency, etc.).
19. Suitable for various AC systems (3-phase 4-wire, 3-phase 3-wire, single-phase 2-wire and 2-phase 3-wire).
20. Modular design, self-extinguishing ABS plastic housing, plug-in terminal, built-in mounting, compact structure for easy installation.
The powerful microprocessor contained within the unit allows you to accurately measure the voltage (2-way, 3-phase / single-phase) and make an accurate judgment; in addition, the corresponding digital output port will activate when there is over/under voltage, over/under frequency, phase loss and other abnormal conditions. This controller has full consideration in various ATS (Automatic Transfer System) applications and can be used directly for specialized ATS, Contactor ATS, Air break ATS, etc. It has compact structure, advanced circuitry, simple wiring and high reliability, and can be widely used in electrical devices, automatic control and test system of electric power, telecommunications, petroleum, coal, metallurgy, railroad, municipal administration, intelligent construction, etc.
