Description
Provision is made for the connection of a remote voltage trimmer, allowing the user to control the generator output well.
An analog input is provided to allow connection to a Newage power factor controller or other external devices with compatible output.
he AVR has the facility for CT drop connection, to allow parallel operation with other similarly equipped generators.
Technical Specification SENSING INPUT Voltage Jumper selectable 100-130 Vac 1 phase or 190-264 Vac 1 phase Frequency 50-60 Hz nominal POWER INPUT Voltage 100-264 V ac 1 phase Frequency 50-60 Hz nominal OUTPUT Voltage 82 V d. C. a. C. Current continuity 4 A (see note 1). Transient 7.5A for 10 seconds. Resistance 15 ohms min (10 ohms min when input volts is less than 175 ac) REGULATION +/- 1.0% (see note 2) DRIFT TERMAL 0.03% per deg. C change in AVR environment
TYPICAL SYSTEM RESPONSE AVR response: 20 ms Archived current at 90%: 80 ms Machine volts at 97%: 300 ms External voltage adjustment +/-10% with 1 k ohm 1 watt trimmer (see note 4) Increased resistance reduces voltage.
LOW FREQUENCY PROTECTION Set point: 94 -98% Hz (see note 5) UNIT POWER DISSIPATION 12 watts Maximum accumulation voltage: 4 volts @ AVR terminals ANALOGUE INPUT Maximum input: +/- 5 Vdc (see note 6) Sensitivity: 1V to 5% Volts generator (adjustable) Input resistance 1k ohm
BEDROOM ADRATURE P INPUT 10 ohms Max. load. Sensitivity: 0.07 A for 5% drop 0PF Max. Input: 0.33 A OVER EXCITATION PROTECTION Set point 75 V dc Delay time 10-15 seconds (fixed) Vibration AMBIENT: 20-100 Hz 1.969 in/sec 100Hz -2kHz 0.12 oz Operating temperature: -40 to +70o C (note 7) Relative humidity: 0-70 5% (note 8) Storage temperature: -55 to+80o C
